Teach you how to maintain the cable
Date: 2019-09-24 Source: Yaofeng
Everything will only have a long service life if it is well maintained. Wire and cable are no exception, and we will make it more effective if we carry out reasonable and proper maintenance. For how to maintain the wire and cable, the following is taught by Yaofeng.
For the maintenance of wire and cable, our wire and cable manufacturers divide it into six points:
1. To keep the surface clean, avoid moisture, freezing, heat, and pressure. The cable is dampened to allow water to penetrate into the interior, and the internal breakdown is used to reduce the insulation. When frozen, the hard layer of the gel is easily cracked and discharged; the heat is easily absorbed by the water to expand and deform; the pressure is applied to damage the protective layer of the metal mesh layer.
2. Prevent insulation oil bedroom cables and corrode rubber.
3. It is forbidden to over bend the cable excessively. Excessive bending will concentrate the capacitance of the capacitor formed by the core wire and the metal mesh at the bend, resulting in leakage at the bend.
4. The filler in the high-voltage cable plug is made of rosin or asphalt and paraffin insulating oil. It is often melted and discharged at the end of the X-ray tube. It should be inspected in time and should be disposed of in time.
5. Always pay attention to the fixing ring at both ends of the cable to the X-ray tube. If the high-voltage generator is tight, check if it is abnormal.
6. When the plug is found to have a breakdown of the plug, the lighter can be scraped off with a knife and used again. Seriously, the new product must be replaced.